I'm testing Exchange 2013 and running into the issue. On the OWA page, when I click on Sign out, OWA doesn't sign out.. It gives me "Sign Out" window with statement: "You must close all browser windows to sign out completely". Same behavior on local server, on remote server.. /OWA /ECP site.. Admin user, non admin user..
Forms authentication is disabled, basic and windows are enabled.
If I manually add /owa/logoff.owa it logs me off..
Any ideas?
Regards, Mindaugas Laucius
I have a mac book pro laptop user and that installed Office 2011 for Mac. I've setup outlook to use a exchange account and for whatever reason. i can't seem to get his calender to sync on the mac version.
Any ideas or help on this would be appreciated.
Thanks
Hi All,
I've had this problem pretty since deployment a couple of weeks ago, so I'm hoping some one can point me in the right direction. I'm running Exchange 2013 on a Server 2012 Standard box with the DC running on a different box, every thing up to date.
Mac clients running Outlook 2011 (14.4.2).
Periodically throughout the day, Outlook loses connection to Exchange server. After several minutes, it will connect back up, and seems to operate normally. During the down time, I am able to connect to OWA, and ActiveSync seems to work as well.
If I run the Remote Connectivity Analyzer while Outlook is responding, I get no errors and the "Connectivity Test Successful" message. However, if I run it while Outlook is NOT responding, I get the following:
Exchange Web Services synchronization, notification, availability, and Automatic Replies.
Not all tests of Exchange Web Services tasks completed.
Creating a temporary folder to perform synchronization tests.
Failed to create temporary folder for performing tests.
Exception details:
Message: The request failed. The operation has timed out
Type: Microsoft.Exchange.WebServices.Data.ServiceRequestException
Stack trace:
at Microsoft.Exchange.WebServices.Data.ServiceRequestBase.GetEwsHttpWebResponse(IEwsHttpWebRequest request)
at Microsoft.Exchange.WebServices.Data.ServiceRequestBase.ValidateAndEmitRequest(IEwsHttpWebRequest& request)
at Microsoft.Exchange.WebServices.Data.MultiResponseServiceRequest`1.Execute()
at Microsoft.Exchange.WebServices.Data.ExchangeService.BindToFolder[TFolder](FolderId folderId, PropertySet propertySet)
at Microsoft.Exchange.Tools.ExRca.Tests.GetOrCreateSyncFolderTest.PerformTestReally()
Exception details:
Message: The operation has timed out
Type: System.Net.WebException
Stack trace:
at System.Net.HttpWebRequest.GetResponse()
at Microsoft.Exchange.WebServices.Data.EwsHttpWebRequest.Microsoft.Exchange.WebServices.Data.IEwsHttpWebRequest.GetResponse()
at Microsoft.Exchange.WebServices.Data.ServiceRequestBase.GetEwsHttpWebResponse(IEwsHttpWebRequest request)
Elapsed Time: 100141 ms.
Nothing I've attempted to do so far as had any meaningful impact, and I am fairly new to Exchange.
Following the adice I've seen online so far, I've:
I've made sure the auto discover in DNS points to the Exchange server.
I've disable auto-discover on the client, manually adding accounts, tried using their FQDN, local IP, LAN IP.
I've made exceptions to the proxie on the client.
Just not sure where to look next? Appreciate any advice out there.
Thanks,
Michael
Hi
We run an Exchange 2013 environment where end users use Outlook 2010.
For some reason several users (at least 5 so far, maybe more that haven't noticed yet) are complaining that they are now unable to add any additional address to the Auto-Complete cache. This can be resolved manually by emptying the cache from within Outlook then disabling and re-enabling auto-complete but obviously they then have a blank slate.
My question is - is there anything that can cause this type of problem collectively? I have seen it previously, but occurrences have always been isolated to an individual user.
Thanks in advance
M
Environment: Exchange 2013 CU3 / Office Web Apps Server 2013
OS: Windows Server 2012 R2
After implementing Office Web Apps server per the Integration with Exchange 2013 instructions, attachment previews in OWA show up as blank windows. The pop up says Opening your mailbox, then goes blank. I have the WAC endpoint configured in Exchange, I can access the discovery URL from the Exchange servers, and I am seeing event 142. Some forums say that these events should be in the CAS application logs. I am seeing mine in the Mailbox server app logs. Has anyone seen a similar issue. I have also attempted to view the ULS logs on the Office Web Apps server, but I don't see anything that looks like a rendering request. But, I also don't know what that request would look like. The Exchange and Office Web Apps server are in the same network with no firewall in between them The local firewalls have also been turned off, so any type of blockage should not be the issue.
I am currently running 2 HP Servers, SAN Storage. I have Exchange 2013 installed and MS Outlook 2013 randomly appears with the message
"The Microsoft exchange administrator has made a change that requires you to quit and restart outlook" It is happening very frequently and is appearing every few seconds on a lot of users.
Hi, I need help with ARR setup. I've followed http://blogs.technet.com/b/exchange/archive/2013/07/19/reverse-proxy-for-exchange-server-2013-using-iis-arr-part-1.aspx to configure ARR (Option 1). My setup:
Windows Server 2012 R2 + Exchange 2013 SP1 CAS+MBX (ex1)
Windows Server 2012 R2 + Exchange 2013 SP1 CAS+MBX (ex2)
Windows Server 2012 R2 + ARR 3.0 (arr)
I can't Authenticate to OWA - I'm able to see starting page of OWA, but after entering username and password I get an errorX-FEServer: EX1, URL look like owa/auth/errorFE.aspx?httpCode=500. When I entering to ECP I get an "Server Error in '/ecp' Application.". Everything works fine when I am logging in directly to OWA
onExchange servers (https://ex1.intdomain.com/owa).In ARR logs no errors.
I am out of ideas what can be wrong. Please help me!
Can someone confirm that this has been broken in SP1 or do I have a misconfiguration on my servers?
Thank you
Daniel
Hi there,
As part of our Exchange 2010 -> 2013 migration we've transitioned CAS to Exchange 2013 2 weeks ago. Some 50 mailboxes have been moved to exchange 2013. Moving mailboxes for everyone is scheduled the 2nd week of july . Because our current version of Outlook is 2007 (migration to 2013 is due thissummer) we've configured NTLM authentication for OA.
Exchange setup: 8 Multirole (CAS/MBX) virtual (VMware) Servers: each 4 cores, 24 Gb memory (reserved) : Windows 2012 SP1, Exchange 2013 SP1 (15.0.847.4030)
Right now we're facing client connectivity issue's: Outlook Anywhere clients are continiously losing connection with exchange, some people (outllook 2007/exc. 2007) report every minute or worse.... Moving the mailboxes of affected people results in less problems: Sometimes no disconnects for 10 to 30 minutes, then reconnects every minute for some time.
We've already set the timeout for the oa-pool in our network proxy (riverbed steelapp) to 20 minutes and the minimum keep alive on the 2013 servers to 120 seconds which improved Oultook 2013 clients; before I experienced reconnects every minute, after every 10 to 30 minutes (with periods of reconnects every minute)
testconnectivity.microsoft.com gives positive results (apart from a nspi warning about server side encryption)
testing with rpcping according to http://blogs.technet.com/b/exchange/archive/2008/06/20/3405633.aspx gives some interesting results:
I've tested all (8) CAS 2013 servers over ports 6001, 6002 and 6003; each 100 rpcpings with a for loop: every response was either about 500 ms or about 21 Seconds ?!?
How can we furher troubleshoot the reason of the long reply time. Eventlogs (and SCOM with exchange 2013 MP) show no relevant events or alerts.
Part of the output of a rpcping
RPCPing v6.0. Copyright (C) Microsoft Corporation, 2002-2006
RPCPing set Activity ID: {59b56c7f-af5d-4836-b701-92070f674de6}
Completed 1 calls in 452 ms
2 T/S or 452.000 ms/T
RPCPing v6.0. Copyright (C) Microsoft Corporation, 2002-2006
RPCPing set Activity ID: {1197cd5e-c79d-4659-b598-3134c335b103}
Completed 1 calls in 468 ms
2 T/S or 468.000 ms/T
RPCPing v6.0. Copyright (C) Microsoft Corporation, 2002-2006
RPCPing set Activity ID: {0cbaef91-ec96-402e-aa00-4913e2be1c51}
Completed 1 calls in 483 ms
2 T/S or 483.000 ms/T
RPCPing v6.0. Copyright (C) Microsoft Corporation, 2002-2006
RPCPing set Activity ID: {525717e5-441b-4a8e-8398-dc86d38852c7}
Completed 1 calls in 21450 ms
0 T/S or 21450.000 ms/T
RPCPing v6.0. Copyright (C) Microsoft Corporation, 2002-2006
RPCPing set Activity ID: {408d806d-ed5a-4f96-8c3c-2446a1d48ad8}
Completed 1 calls in 21497 ms
0 T/S or 21497.000 ms/T
RPCPing v6.0. Copyright (C) Microsoft Corporation, 2002-2006
RPCPing set Activity ID: {3b441a9f-7606-4106-850f-fccb7c0f1bb1}
Completed 1 calls in 21497 ms
0 T/S or 21497.000 ms/T
RPCPing v6.0. Copyright (C) Microsoft Corporation, 2002-2006
RPCPing set Activity ID: {bf994811-8528-433f-b532-f29d347fce5b}
Completed 1 calls in 21590 ms
0 T/S or 21590.000 ms/T
RPCPing v6.0. Copyright (C) Microsoft Corporation, 2002-2006
RPCPing set Activity ID: {ddb5248b-82aa-4586-b2f7-9c04c9922034}
Completed 1 calls in 577 ms
1 T/S or 577.000 ms/T
Summary of all servers (test this morning)
| Server | Port | # >20.0001 |
| Server1 | 6001 | 32/100 |
| Server1 | 6002 | 27/100 |
| Server1 | 6004 | 0/100 |
| Server2 | 6001 | 47/100 |
| Server2 | 6002 | 0/100 |
| Server2 | 6004 | 37/100 |
| Server3 | 6001 | 0/100 |
| Server3 | 6002 | 0/100 |
| Server3 | 6004 | 41/100 |
| Server4 | 6001 | 0/100 |
| Server4 | 6002 | 29/100 |
| Server4 | 6004 | 42/100 |
| Server5 | 6001 | 69/100 |
| Server5 | 6002 | 48/100 |
| Server5 | 6004 | 69/100 |
| Server6 | 6001 | 0/100 |
| Server6 | 6002 | 0/100 |
| Server6 | 6004 | 1/100 |
| Server7 | 6001 | 0/100 |
| Server7 | 6002 | 1/100 |
| Server7 | 6004 | 1/100 |
| Server8 | 6001 | 0/100 |
| Server8 | 6002 | 0/100 |
| Server8 | 6004 | 0/100 |
I've repeated above test this afternoon: All test resulted in about 40-60 (of 100) replies >20 seconds
Hi there,
When I look on the customers outlook 2013 it says that they have 3 unread e-mails. I then go to check unread emails and there are none there. I have re-built her ost and am still experiencing the same problem. I have checked OWA and it is also saying she has 3 unread emails in her mailbox. I have also tried selecting all emails and using the ctrl + q shortcut to read them all and that has also not done it. I have tried to clear offline items and that also did not do it. I think it might be something to do with the server since both her Computer and OWA are saying that she has these 3 unread emails. Ran out of ideas so any help would be much appreciated.
Thanks in advance,
Lennie
I have one issue related "Microsoft Outlook Inbox repair tool"
Our office just upgrading from Microsoft outlook 2010 to 2013.
Two of computers problem with Microsoft Outlook.
When the computer restart, we always get error with "Microsoft Outlook Inbox repair tool"
After we fix it, it work but if we do restrat this error come up.
What can we fix it working forever?
P.S: i am not Domain Administrator
Thanks
Hi,
I've upgrade two of my customers to Exchange 2013.
On of them was coming from 2007, and the other was already running 2010.
Migration from both of the servers went good.
However with the customer which upgraded from 2010 to 2013 i'm experiencing strange OWA behavior:
When I login to OWA on https://owa.contoso.com/owa, and input my credentials and click sign in: I receive this error:
The page you're looking for couldn't be found on the server.
X-FEServer: JVBMAIL01 Date: 11-6-2014 11:54:48
Fewer details..
-> Refresh the page
In the addressbar, the following URL is displayed: https://owa.contoso.com/owa/auth/errorFE.aspx?httpCode=404
But... when I click: "Refresh the page" of just hit F5, the login proceeds, and my OWA is displayed and working fine.
This behavior only happens with my customer which was upgraded from 2010 to 2013.
The customer which i've upgraded from 2007 to 2013 doesn't experience this problem.
I've matched the IIS settings and redirect/ssl options on both servers. They are the same.
I've tried other users and i've experienced that on one user, the error message didn't appear.
When I try to delete the Exchange atributes from the user, (after exporting the mail to a PST file) and re-add the Exchange attributes, the message is gone. This isn't a solotuion however, since i've got 166 users, and about 150 of them, get the error message.
New users don't get the error.
Anybody got any clues?
Around the beginning of the year, we started the migration from an On-Site Exchange 2010 server to Office 365.
The on-site server had an alias of mail.domain.com, an SSL certificate was purchased that covered ServerName.Domain.com, autodiscover.domain.com, and mail.domain.com.
Halfway through the migration I changed autodiscover.domain.com to point to autodiscover.outlook.com both externally and internally on GoDaddy and our MS DNS Servers. Earlier this month, the migration was completed and I turned down and retired the on-prem server. Since users were comfortable with and knew the "mail.domain.com" url, I setup our web server to automatically redirect to the Office 365 webmail servers (http://mail.office365.com).
Now users are receiving a Security Alert periodically and when they start Outlook that the SSL certificate is incorrect for mail.domain.com (below). As far as I know, nothing should be configured to use the old mail server, a capture of the Outlook Connection Status is below as well.
Jonathan N.
Hello ,
WE Have a wildcard certificate to certificate to the clients and we have a problem with pop and imap logon .
this only run when you put :
set-POPSettings -X509CertificateName nameserver
set-IMAPSettings -X509CertificateName nameserver
if you put:
dont run.
any advice ?
must remove any autosignal certificate
any trick?
Thanks.
mcse 200x + mesaging 2000 2003 2007 2010
Office 365 Exchange, as of last week multiple Office 2010 clients having connectivity issues with their email. Running RCA test confirms that https://autodiscover.outlook.com/autodiscover/autodiscover.xml is not responding.
Further tests confirm port 443 is not open! CNAME records configured appropriately... autodiscover.mydomain.com is a CNAME for autodiscover.outlook.com
Can't setup new mail profiles for users because Autodiscover fails!
What's up???
Hello,
I am stuck in a weird situation.
Details:
Issue:
So what I attempted to do:
The benefit is I can still access through HTTP and my Mail Client and Phone since they use HTTP, however... standard Outlook clients don't work.
I have no idea why this would break merely because I started the Update 5 and it did a prereq check
I looked in the event logs.. but nothing that I can see at all :"-(
Any suggestions please
Under Exchange 2010 were several documents and articles giving guidance for Setting up Kerberos for your load balanced CAS-Array. However there is not much in the way of guidance when it comes to Exchange 2013.
I believe that http://technet.microsoft.com/en-us/library/ff808312.aspxand http://blogs.technet.com/b/kpapadak/archive/2011/03/13/setting-up-kerberos-with-a-client-access-server-array.aspx would still be valid.
However I did come across an article http://unifiees.blogspot.com/2012/11/tutoriel-exchange-2013-configurer.html which you have to translate from French. He talks about reconfiguring the user authentication for Outlook Anywhere. Which we did not have to do under Exchange 2010.
Example:
Get-OutlookAnywhere Server-SV-E15-2 -ADPropertiesOnly | Set-OutlookAnywhere -InternalClientAuthenticationMethod Negotiate-IISAuthenticationMethodsNegotiate, Ntlm
I would like to see guidance for 2013 if possible to see if there are any other little areas with the changes in Client Access that the community does not know about yet.
Wirrel
I have an exchange 2010 SP3 with the last cumulative update.
I've an error that is explained in lots of messages of this forum: I cannot delete messages in owa.
The error is exactly "mailbox you're trying to access isn't currently available". There are no event viewer warnings or errors related. Windows Server 2008 R2 has service pack 1 installed, then has the patch of IPv6 with EWS.
I've tried lots of ideas of the forum but doesn't work
Any idea?