We are in the process of moving mailboxes from our 2010 environment to our 2013 environment and are using the 2013 CAS as internet facing, for any mailboxes on 2010, requests are proxied through.
We have the registry DWORD ChangeExpiredPasswordEnabled set to 1 in HKLM\SYSTEM\CurrentControlSet\Services\MSExchange OWA but this isn't working.
It use to work perfectly well when we had the 2010 CAS server internet facing.
Is this still supported in Exchange 2013?
Hi all,
First kindly informed that i used Exchange 2010 sp3 ( i did,'t find my version in the list )
when the internal users try to access owa by using proxy , thet succeed to login but after about 1 min they probt again to enter credential
if they disabled proxy everything is working fine
we use isa 2006 as proxy for internal users
owa is hosted on 2 cas servers ( DNS round Robin used )
I recently purchased Office 365 through Go Daddy.
After installation Outlook 2013, I set up my email account using the autosettings through Microsoft Exchange. At first, everything worked seamlessly and sending emails was not a problem and it is currently not a problem from my lap top I can no longer send outgoing messages form my desktop. I have removed the account multiple times to no avail, restarted outlook 2013, etc but nothing is working to get the outgoing messages sent.
Please Help, this is killing me!!!!
BTW, I am using MacAfee Internet Security but I have disabled
Hi,
I have an Exchange 2010 system with 2 CAS-HUB server + 2 Mailbox server.
I have 3 owa virtual directories for 3 sub-companies in my organization. For example:mail.abc.com; mail.def.com, mail.xyz.com. All accounts in one domain.
Outlook 2010/2013 displays one of these URL for "Access this account from the web". For example:mail.xyz.com
Now I want to change the URL displayed by Outlook into another OWA I have, for example:mail.abc.com, but cannot find any information.
Please give me an advice.
Thanks,
Dear community,
Currently I am experencing a problem with Outlook tasks that included email attachments messages.
When open the tasks first of all i receive the error "could not open one or more atachments." and when you try to open up the attachment itself
i get the error message "one or more parameters are incorrect".
looking with mfcmapi at the attachment and his properties I noticed the strange settings or the error mentioned.
see picture
Selecting the attachment and looking at his values, the pr_attach_method propertyname dispaly a value of 0, while the object itself says method "attach_embedded_msg"; which corresponds with a value of 5.
Modifying the propertyname value seems impossible.
how can i rectify this error without performing a restore ofcourse. ;-)
and what is the root cause of this?
Infra running Exchange 2010SP3RU3 with Outlook 2010SP1
Hi,
We're having an issue with some Outlook 2013 clients dropping their connection to Exchange 2013 (both SP1). Connections are made using the MAPI/HTTP protocol, via a reverse proxy. When the connection is dropped, the proxy logs simply show that the connection
was reset ("connection reset by peer").
There is no obvious cause for this, or related errors on the Exchange server's event logs. What could be causing this?
In OWA, the address lists doesn't show inside of their containers. Outlook does.
is this by design ???
Gustavo Hllwig
HI all,
I have following error on Windows 8.1 with Outlook 2013
I receive an e-mail containing an image in the Body directly.
Some times for unknown reason the image displayed is the last image I opened on my computer and not the actual image on the E-mail.
If we close and open Outlook 2013 and open the E-mail it shows again correct Image.
Is this some sort of a bug?
I have detected this bahaviour on several machines with Same Setup.
Also diferent mailboxes are affected.
I have only seen this behaviour on Windows 8 + Outlook 2013 enviorments
How do i redirect http to https
My users access OWA by mail.mycompany.com rather than https://mail.mycompany.com/owa
how do i redirect in IIS
can i follow this article
http://www.mustbegeek.com/configure-url-redirection-in-exchange-2013/
Hello
I need a help, please. I tried lot of results from different forums.
I have Exchange 2007 SP1, TMG and WP8 and I thing I have got error code 85010014 after some update. Because It was working nice more than half year.
The OWA is working correctly, I did not publish Autodiscover and also I do not have problems with selfsigned certificate.
When I try to make manual sync, I always get that error code, but after Push from the server (after some time), the phone is synced.
Please help me
Good afternoon, was integrated with Exchange 2013 with Lync Server 2013 which could use the chat in OWA however after I installed Exchange 2013 CU2 this integration stopped working, i did the integration again and not working.
OWA is a message "There is a problem with instant messaging. Try again later. If the problem persists, please contact support."
Someone has experienced this or have any idea how to solve?
Henver Rodrigo MCT | MCITP | MCTS Blog: http://henverrodrigo.wordpress.com
I had a working solution Exchange 2013 + Lync2013 integrated in OWA.
I've installed SP1 for Exchange 2013 and now it doesn't work :(
I did the integration again
(added 2 strings in web.config:
<add key="IMCertificateThumbprint" value=".............."/>
<add key="IMServerName" value="Lync2012server.mydomain.com"/>)
but it doesn't help.
What changed in SP1? Why Lync integration doesn't work now?
Hi all;
i have two distinct AD forests, domainA.com and domainB.com. I have installed Exchange 2013 in domainA. i also configured trust approbation between the two domains, and i created a linked mailbox for a user in domainB.
i can access to the mailbox with owa with domainB\user credentials. but when i try to configure Outlook for this user in a laptop belonging to domainB, i have connection errors. it seems like Outlook cannot contact the exchange server... is there a special configuration for Outlook to be able to see the Exchange server of the other domain?
Hi need help on this.
i got a client that is mail box recurring task keep comming up as not completed and got duplicated one complet and one is not in Outlook.
On the exchange side the task is always one day behind the one in Outlook.
Got any solution to that.
I try to flush ost file and get new one but problem still there.
I stumbled across a funny little problem yesterday after a rash of users calling wanting to know why rooms were declining their meeting requests..
The rooms were declining for perfectly legitimate reasons.. Conflicts or no end date but the accept/decline reply messages the rooms were sending out had no details in the message body when viewed from Outlook 2010 or 2013.
If message preview is enabled in Outlook 2013 you can read a few lines of the body in the inbox view but it's still blank when you open the message.
Reading pane is also blank.
Opening the message from OWA or my phone shows the complete message body.
Very odd. It reminds me of the bug in Exchange 2013 CU2 where meeting invites to external users were sent blank unless they were sent as iCalendar.
Maybe this will resolve itself when I load SP1 in a few weeks.
Any one else seeing this?
We are running 2013 CU 3
Everytime I create an appointment in my Exchange 2010 calendar and try to resize it, I get the following error:
The reminder for "Appointment" will not appear because the item is in a folder that doesn't support reminders. Is this OK?
Of course it's not OK. :)
This is a Exchange 2010 calendar (running in cached mode), not a PST or archive. It is my actual calendar. The mailbox has been converted from Exchange 2003 to 2010 a while ago. I never had these problems in Exchange 2003.
I tried running Outlook /cleanreminders, but that doesn't help.
It also doesn't matter if Outlook is run in cached or non-cached mode.
What should I do?
Under Exchange 2010 were several documents and articles giving guidance for Setting up Kerberos for your load balanced CAS-Array. However there is not much in the way of guidance when it comes to Exchange 2013.
I believe that http://technet.microsoft.com/en-us/library/ff808312.aspxand http://blogs.technet.com/b/kpapadak/archive/2011/03/13/setting-up-kerberos-with-a-client-access-server-array.aspx would still be valid.
However I did come across an article http://unifiees.blogspot.com/2012/11/tutoriel-exchange-2013-configurer.html which you have to translate from French. He talks about reconfiguring the user authentication for Outlook Anywhere. Which we did not have to do under Exchange 2010.
Example:
Get-OutlookAnywhere Server-SV-E15-2 -ADPropertiesOnly | Set-OutlookAnywhere -InternalClientAuthenticationMethod Negotiate-IISAuthenticationMethodsNegotiate, Ntlm
I would like to see guidance for 2013 if possible to see if there are any other little areas with the changes in Client Access that the community does not know about yet.
Wirrel