Quantcast
Channel: Exchange Server 2013 - Outlook, OWA, POP, and IMAP Clients forum
Viewing all 10580 articles
Browse latest View live
↧

Cannot read one instance of this recurring appointment. Close any open appointments and try again, or recreate the appointment.

November 13, 2012, 8:44 am
$
0
0

Hi,

I have a user that gets the following error when opening a reoccurring entry, we have applied the following fix but the issue has reoccurred again.  Is there a limit to how high you can set the value, if so what are the implications?

1.Open regedit
2.Locate and then click the following registry key: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\MSExchangeIS\ParametersSystem
3.On the Edit menu, point to New, and then click Key.
4.Type MaxObjsPerMapiSession, and then press ENTER.
5.On the Edit menu, point to New, and then click DWORD Value.  Name the new value "objMessage" and set it's value to something higher than 250 (this limit shouldn't impact performance unless you have a script of some type that retrieves large numbers of messages at once; I'd probably set it to 500 or 1000 for now).  Make sure you are setting the value in decimal.
 
6.Close Registry Editor".

Thanks

David

 

↧
Search

Newly created user cannot receive email from outside our domain.

November 13, 2012, 1:15 pm
$
0
0
We are currently running Exchange 2003 R2. All users up to this point have not had an issue with sending or receiving email. The users are using Outlook 2010 to manage email. Recently, when creating new users, there is an issue with them being able to receive email from outside our domain. They can send outside and they can send and receive mail inside. This has been an ongoing issue. I thought it might have something to do with the size of the mail store since that was one of the errors I found in the event log (mail store is 30GB and you are trying to use 34GB). I cleaned up the mail store, cleaned out temp files, cookies... and rebooted the Exchange server. Verified the mail store was down under the 30GB and had the users in question try again. They are still not able to receive outside email. I found the registry entry that I changed for the size of the mail store. Still nothing. I am out of ideas and running out of patience. I have found nothing that will help in the forums to date. Any ideas would be greatly appreciated.
↧
↧

outlook 2007 getting stuck after installing communicator

November 14, 2012, 1:08 pm
$
0
0
i have an exchange email, on a domain. My email was working fine and after we installed the office communicator my email starts working just fine and if i start the communicator, after a while my email gets stuck. I dont an error messaje or anything, the email just stay stuck for a long time until i have to kill the task. Any help will be appreciated since its not happening just to me.
↧

MSExchange OWA Event 139 - HTTP 500 Error when accessing OWA

November 12, 2012, 9:56 pm
$
0
0

I'm having a strange issue when attempting to access OWA.  I receive a HTTP 500 error, however, this is what's logged in the Application log:

________________________________

Event 139, MSExchange OWA

There was an error setting up WacConfiguration. Wac will be disabled and we will fall back to stellent. The WacUrlHostName was invalid. Expected a valid Uri. Actual value was ''. Value read from 'OrganizationConfig'

________________________________

This is an Exchange 2013 RTM install on Server 2012 with both Client Access and Mailbox roles.  I can access ECP just fine and I double checked to make sure the server was properly configured for external access.  Any thoughts?




↧

property update did not succeed

November 14, 2012, 4:12 pm
$
0
0
HOw do I overcome this error - property update did not succeed
↧
↧

Unable to access shared calendars on outlook 2010

November 14, 2012, 4:35 am
$
0
0
Hi i have a user who is unable to access shared calendars. It's stuck at 'updating'. User has Outlook 2010/ running on exchange 2003 server. i've tried using outlook in safe mode and tried running /cleanfreebusy switch but no joy. Its only happening on one particular machine as the user can see shared calendar on another machine and on citrix. Any help will be much appreciated
↧

When multiple users are editing a shared calender appointment, only users on Outlook 2003 get prompted if it has been changed since opening

November 15, 2012, 2:17 am
$
0
0

We have just upgraded a few users to Office 201 and have noticed the following.

 

Office 2003 scenario:

User a opens a calender appointment in shared calender 123

User b opens the same calender appointment in shared calender 123

User a makes a change, saves and closed

User b makes a change and when trying to close gets prompted that the appointment has changed since opening and would they liek to save a copy

 

Office 2010 scenario:

As above but when user b makes the change and saves no warning is given and the changes user a made are lost.

 

Have a missed a tick somewhere or is this by design in Outlook 2010?

↧

E-Mail Redirection using OWA not working (Exchange 2010)

November 12, 2012, 6:38 am
$
0
0

Hi,


Everytime a user wants to set up e-mail redirection using OWA, you get the message "Anerror occurred while processing your request. Please try again in afew minutes"

In the the Event Viewer you get the following events:


1.

Event ID: 5

Source: MSExchange Control Panel

Exchange Control Panel detected an unhandled exception during a web service request.

System.TypeInitializationException: "Microsoft.Exchange.Management.ControlPanel.ErrorHandlingUtil" ---> System.ArgumentException:The requested value "true" could not be found.
   at System.Enum.Parse(Type enumType, String value, Boolean ignoreCase)
   at Microsoft.Exchange.Management.ControlPanel.ErrorHandlingUtil..cctor()
  
   at Microsoft.Exchange.Management.ControlPanel.ErrorRecord.set_Message(String value)
   at Microsoft.Exchange.Management.ControlPanel.ErrorRecord.set_Exception(Exception value)
   at Microsoft.Exchange.Management.ControlPanel.ErrorInformationBase..ctor(Exception exception)
   at Microsoft.Exchange.Management.ControlPanel.ErrorRecord..ctor(ErrorRecord errorRecord)
   at Microsoft.Exchange.Management.ControlPanel.PSCommandExtension.<Invoke>b__0[O](ErrorRecord errorRecord)
   at System.Linq.Enumerable.WhereSelectEnumerableIterator`2.MoveNext()
   at System.Linq.Buffer`1..ctor(IEnumerable`1 source)
   at System.Linq.Enumerable.ToArray[TSource](IEnumerable`1 source)
   at Microsoft.Exchange.Management.ControlPanel.PSCommandExtension.Invoke[O](PSCommand psCommand, RunspaceMediator runspaceMediator, IEnumerable pipelineInput, WebServiceParameters parameters)
   at Microsoft.Exchange.Management.ControlPanel.DataSourceService.CoreInvoke[T](PSCommand psCommand, IEnumerable pipelineInput, Identity translationIdentity, WebServiceParameters parameters)
   at Microsoft.Exchange.Management.ControlPanel.DataSourceService.NewObject[L,C](String newCmdlet, C properties)
   at Microsoft.Exchange.Management.ControlPanel.InboxRules.NewObject(NewInboxRule properties)
   at SyncInvokeNewObject(Object , Object[] , Object[] )
   at System.ServiceModel.Dispatcher.SyncMethodInvoker.Invoke(Object instance, Object[] inputs, Object[]& outputs)
   at System.ServiceModel.Dispatcher.DispatchOperationRuntime.InvokeBegin(MessageRpc& rpc)
   at System.ServiceModel.Dispatcher.ImmutableDispatchRuntime.ProcessMessage5(MessageRpc& rpc)
   at System.ServiceModel.Dispatcher.ImmutableDispatchRuntime.ProcessMessage4(MessageRpc& rpc)
   at System.ServiceModel.Dispatcher.MessageRpc.Process(Boolean isOperationContextSet)

System.ArgumentException: The requested value "true" could not be found.
   at System.Enum.Parse(Type enumType, String value, Boolean ignoreCase)
   at Microsoft.Exchange.Management.ControlPanel.ErrorHandlingUtil..cctor()

2.

Event ID: 4999

Source: MSExchange Common

the watson report about to send for process 5748 with the values E12, c-RTL-AMD64, 14.02.0318.004, ECP, M.E.Management.ControlPanel, M.E.M.C.ErrorHandlingUtil..cctor, S.S.Diagnostics.CallbackException, 3470, 14.02.0318.004.
ErrorReportingEnabled: False

Do yout have any idea what i could do?


↧
Search

Junk E-Mail function seems to be disabled in Outlook 2007.

November 15, 2012, 7:01 am
$
0
0
We are a small company with 3 users and we are on an exchange server. All three users have Outlook 2007 installed on their machines. One user has a huge problem with spam. All three of us get junk emails but for 2 users, all the junk is captured by the junk folder. One user, however, had to purchase a separate anti-spam software and install it on her machine only because junk e-mail function seems to be disabled and everything goes to the inbox. We checked all possible settings and they are at the highest but the function just does not seem to be working. It just seems odd that we are all on the same server and 1 user is having issues. The only difference I can think of is the way our blackberries are connected to the server. The one user with a junk email problem is connected through blackberry manager software and the two users are connected directly to the exchange.
Does anyone have any ideas? Thanks in advance to all of you for your help.
↧
↧

Sharing WLM calendar with Outlook Web Access (Exchange Online)

November 15, 2012, 8:56 am
$
0
0
Hi,

I'd like to know if it's possible to view a WLM calendar on OWA. At the office we use Exchange Online and Outlook Web Access for our mail and calendar solution. At home, my family uses a Windows Live calendar (outlook.com address) to manage our family's schedule. Is there any way that I can view the family calendar (WLM) on my work account (OWA)? Ideally, I'd like the option to toggle the family calendar on/off. I'd also like to keep the family calendar hidden from my colleagues when they view my work calendar.

Thanks
↧

Outlook anywhere NTLM for internal users and basic for external users?

November 16, 2012, 4:21 am
$
0
0

Hi,

Have some thoughts on Outlook Anywhere (and perhaps Autodiscover)

from my understanding the externalclientauthentication/internalclientauthentication values are provied to the client using autodiscover?

what determines the choise of auth? lets say a request comes in to contoso.local and that one is configured on the internalhostname property it would use the auth method of the internalclientauthenticationmethod value?

and if a request comes into contoso.com and that one is stamped on the externalhostname it would use the value on the externalclientauthentication method?

and if both internalhostname and externalhostname is set to the same value?

So if looking at our current Outlook Anywher settings on a CAS server

# Get-OutlookAnywhere CAS01\rpc* | fl 

ExternalHostname: company.com

InternalHostname: company.com

ExternalClientAuthenticationMethod: Ntlm

InternalClientAuthenticationMethod: Ntlm

IISAuthenticationMethods: Ntlm

eventhough I can set IISAuthenticationj using PS to both NTLM and basic that is just for IIS right.

How should it be configured so that external users (having outlook installed at a home computer not AD joined) to be able to access the mailbox? Would we need IISAuthentication set to both basic and NTLM and let TMG/UAG handle the authentication on DMZ? 

Similar posts sayng that both cannot be enabled? But is that for both internal/external users?

http://social.technet.microsoft.com/Forums/en-US/exchange2010/thread/21867578-e623-4756-b483-dfb31162a665/

http://social.technet.microsoft.com/Forums/en-US/exchange2010/thread/3e4bb79d-b31b-423a-b49d-628dd66db6a3

↧

Exchange 2010 multi tennant Autodiscover Issue

November 18, 2012, 3:19 pm
$
0
0

I am using the IIS redirect option as my DNS server does not support SRV

http:// social.technet.microsoft.com/wiki/contents/articles/6818.exchange-2010-multi-tenant-autodiscover-service.aspx?wa=wsignin1.0

All is setup correctly and everything states successful when testing Autodiscover yet I am still prompted when opening Outlook RPC over HTTPS with "The name on the security certificate is invalid or does not match the name of the site"

Results of Test E-mail AutoConfiguration test (use AutoDiscover)

Autodiscover to http:// & https:// domain1- failed (0x800C8203)

Autodiscover URL redirection to https:// domain2 (host domain)

Autodiscover to https:// domain2/Autodiscover/autodiscover.xml - Succeeded (0x00000000)

Does anyone have this working without this prompt?

↧

you do not have permission to access this mailbox. Pls contact technical support

November 19, 2012, 9:19 am
$
0
0

Hello,

We are getting this error message when we access OWA. We checked all permissons and looks good. We also checked the inherritable permissions on those mailboxes and still not working.

pls help.

Sony

↧
↧

Migrated to Personal Archive, Still Getting PST

November 19, 2012, 10:11 am
$
0
0

Exchange 2010 SP2, Outlook 2010 SP1

I have a user that has been set up with a Personal Archive and all items have been migrated from his Archive.pst to the Personal Archive. In Outlook, all ability to manage AutoArchive (PST) is gone as expected and Retention Policies have been set. The legacy PST file has been removed.

The user contiues to have a PST created. I know the user had AutoArchive settings on his Calendar and Tasks and I know that the ability to set Retention Policies on those items is not available unless I install Exchange 2010 SP2 RU4.

The question is, why does the user continue to get a PST created? Is this due to the legacy AutoArchive settings? How do I go about fixing this if the AutoArchive settings are no longer available?

↧

Make DC Secondary

November 20, 2012, 5:34 am
$
0
0

Hi,

We have a Remote Site over a VPN Connection, and the DC on site is being used a primary DC along with 2 others on the main Site.

How do i change this DC to be a secondary DC so it is only used for logons for people on that site.

At the moment i get issues where some peoples AD Logon is done using the DC on the remote site.

Thanks

↧
Search

I've yet to find a definite answer on this question: what is the maximum mailbox size limit using Exchange 2003 and Outlook 2010 ost files?

November 20, 2012, 9:13 am
$
0
0

I've yet to find a definite answer on this question: what is the maximum mailbox size limit using Exchange 2003 and Outlook 2010 ost files?

So the limit on our Exchange 2003 server is currently set to 2GB....but from what I've researched, Outlook 2010 ost can go upwards of 75GB. Can I simply go thru the configuration on the 2003 Exchange server, make the mailbox limit to say 10 GB and have happy Outlook 2010 ost users? Only a handful of users would like this, so I was going to set the higher limit specifically on those users only (that is, clearing the check box 'Use mailbox store defaults')....and keep the default on the Exchange 2003 mailbox limit to 2GB.

Thanks

↧

Require unread email count of users mailbox in Exchange 2010 Organisation wide

November 21, 2012, 3:58 am
↧
↧

How do I know which emails will be send via Forced TLS

November 21, 2012, 6:12 am
$
0
0

We have several companies that we have established forced TLS with via our Exchange 2010 server.  How do my users know if the email address is one that will be going via TLS? 

For example, let's say we have abc123.com entered as someone we DO have forced TLS with.  xyz.com is NOT someone we have forced TLS setup with.    My user is going to send an email to bob@abc123.com and can't remember if emails to 123abc.com or xyz.com will go via TLS.  

My thinking is that Outlook could show the email address in a color or place and icon in front of email addresses that will be sent via TLS.

  • bob@abc123.com  <-- Green (secure)
  • sue@123abc.com <--- Red (not secure)

↧

Exchange connectivity issue (?)

November 19, 2012, 9:49 am
$
0
0
I've got a user who intermittently looses access to free/busy data. She'll add another user to a meeting, and the free/busy info is filled with backslashes, indicating "No Information" is available. The user has Outlook 2010 and her mailbox is on Exchange 2010. The Exchange server and user are in the same domain.

She has a second issue, that I think is related. Occasionally (apparenlty randomly), a dialog box pops up, asking for Exchange credentials. If she enters her credentials and clicks OK, the box immediately pops-up again. If she clicks Canel, the box goes away for a while. After clicking the Cancel button, she can still send and receive e-mail.

She was plugged into the LAN, and also connected to the WLAN. I had her disable her wireless card, but that didn't help. I tested Exchange connectivity (from the Outlook tool) and it came back clean.

What are my next troubleshooting steps?
↧

Hide account from GAL

November 20, 2012, 9:06 pm
$
0
0

Dear Expert,

After hide account from exchange 2007 GAG its disappear however but still email send how to prevent

Support@Mytechnet.me

↧
Viewing all 10580 articles
Browse latest View live
Search
<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>